Kit = partially assembled, easy to complete.
A. Slant Style Bracket ❖
Set at a 35 degree angle to the wall, the 1½" x 5½" notched arm features
a subtle, decorative end detail. The arm is attached to a 21"H, 3¼"W
mounting board and projects 24". Mounts with four screws, not included.
Notched for three laths, sold separately. One bracket recommended for
every 8 ft. of lathing. #795475 $139 each
B. Shelf Style Bracket ❖
The 1½" x 5½" notched arm has a fine, decorative end detail and is
attached to a 21"H, 3¼"W mounting board set at a 90 degree angle.
Projects 26". Mounts with four screws, not included. Notched for three
laths, sold separately. One bracket recommended for every 8 ft. of lathing.
#795479 $139 each
C. Cellular PVC Lathing ❖
This 1¾"sq. lathing is ordered in lengths from 4' to 12' and can be used with
any of our brackets to complete a trellis system. Custom lengths available.
The cellular PVC lathing is reinforced with aluminum for structural stability.
This added support does not extend all the way to both ends of the lathing
piece. Rather, it stops 8" from each end. To ensure that you do not cut the
aluminum when sawing the lathing to your desired length, we advise that
you measure and cut lathing evenly from each end. One bracket recom-
mended for every 8 ft. of lathing.
4'L #795476 $64 each 9'L #795472 Motor freight. $119 each
5'L #795476A $69 each 10'L #795472A Motor freight. $139 each
6'L #795477 $79 each 11'L #795473 Motor freight. $159 each
7'L #795478 $84 each 12'L #795474 Motor freight. $179 each
8'L #795471 $109 each
D. Sheldon Trellis Bracket ❖
Ideal for a wider door or over garage doors, the mounting bracket is
5½"W, 36"H, 2"D. The 3½" sq. carrying arm has a beveled end cut, curved
bracket and projects 36". Mounts with 2 lag bolts, not included. Notched
for three heavy laths, sold separately. Photo at right shows the Sheldon
Brackets with two standard 24" Woodbury Lattice Panels sold separately
on page 35. Motor freight. One bracket recommended for every 8 ft. of
lathing. #795470 $389 each
E. Sheldon Mid-span Support Bracket ❖
Adding extra strength and support for your trellis structure, the mid-span
bracket is 38" long and 3½" deep with notches at 11", 20", and 29"
intervals from the wall. In this cellular PVC bracket, 1½" sq. stainless
steel tubing is housed within the support bracket.
#795470A $349 each
L a t t i c e & Tr e l l i s
Trellis
Permit us to stimulate your imagination with ideas for trellis that
add handsome good looks atop windows and over the garage. All
handcrafted in low-maintenance cellular PVC. V
A, C
B, C C, D
C, D
E
82